Adding a Cutter

Adding a Cutter
To add a cutter to CUT-Server: Click the [Manage Cutters] button on the toolbar (Figure 1). Using the [Type] field, and select your cutter from the list of available cutters. If your cutter is not available, select [Generic Cutter] (Figure 2) Enter a Display Name for your cutter, and click [OK]. Generic Cutter While most cutters are supported by CUT-Server, there are a few that are not. If your cutter is not supported, use the Generic Cutter. This cutter works with almost any cutter and provides solid output. After you've added your cutter, you should configure your cutter.	Figure 1 Figure 2

To add a cutter to CUT-Server Collapsed :

Click the [Manage Cutters] button on the toolbar (Figure 1).
Using the [Type] field, and select your cutter from the list of available cutters. If your cutter is not available, select [Generic Cutter] (Figure 2)
Enter a Display Name for your cutter, and click [OK].